MICRO CONTROLLER SIMULATION WITH PROTEUS 8

EMBEDDED 1.CLICK->NEW PROJECT

2.GIVE SOME TITLE AS YOU WANT.CLICK NEXT 

3.SELECT SCHEMATIC PREVIEW PANEL SIZE.THEN CLICK NEXT
                4.SKIP THE WINDOW TO NEXT

5.SELECT FIRMWARE AS LIKE AS SHOWN IN THE FOLLOWING IMAGES.THEN CLICK FINISH BUTTON.

 6.CLICK P TO ADD SOME COMPONENTS TO YOUR PROJECT.
ADD RESISTOR & LED.
 CHANGE PROPERTY OF MICRO CONTROLLER AND THE HEX FILE AS YOU WANT.
8

9

10.FINALLY, RUN PROJECT

Comments

Post a Comment

Popular posts from this blog

8051 INTERFACING WITH 7 SEGMENT DISPLAY AND 3X3 MATRIX KEYPAD

Image
                                          PROGRAM: #include<reg52.h> void scankey(); void result(unsigned int m); void delay(unsigned int ms); sbit a=P2^0; sbit r1=P1^0; sbit r2=P1^1; sbit r3=P1^2; sbit r4=P1^3; sbit c1=P1^4; sbit c2=P1^5; sbit c3=P1^6; int value[10] = {0x3F, 0x06, 0x5B, 0x4F, 0x66,0x6D, 0x7D, 0x07, 0x7F, 0x6F}; void main() { a=1; scankey(); } void delay(unsigned int ms) { unsigned int i,j; for(i=0;i<=ms;i++) for(j=0;j<1275;j++); } void scankey() { c1=1;c2=1;c3=1; while(1) { r1=0; r2=1; r3=1; r4=1; if(c1==0){delay(20);while(c1==0);result(1);} if(c2==0){delay(20);while(c2==0);result(2);} if(c3==0){delay(20);while(c3==0);result(3);} r1=1; r2=0; r3=1; r4=1; if(c1==0){delay(20);while(c1==0);result(4);} if(c2==0){delay(20);while(c2==0);result(5);} if(c3==0){delay(20);while(c3==0);result(6);} r1=1; r2=1; r3=0; r...
Read more

7 SEGMENT INTERFACING WITH 8051

Image
                                  program: #include<reg52.h> #define seg_data P2 sbit seg1=P3^0; sbit seg2=P3^1; sbit seg3=P3^2; sbit seg4=P3^3; int ones=0,tens=0,hundreds=0,thou,l; void display_digit(int ); void delay(unsigned int ); void main() { unsigned int m;   seg4=seg1=seg2=seg3=1; while(l<=999) { ones=l%10; tens=(l/10)%10; hundreds=(l/100); thou=l/1000; for(m=0;m<150;m++) { display_digit(ones); seg1=1; delay(20); seg1=0; display_digit(tens); seg2=1; delay(20); seg2=0; display_digit(hundreds); seg3=1; delay(20); seg3=0; display_digit(hundreds); seg3=1; delay(20); seg3=0; display_digit(thou); seg4=1; delay(20); seg5=0; } l++; } } void delay(unsigned int m) { long int k; for(k=0;k<m;k++); } void display_digit(int c) { switch(c) { case 0: seg_data=~0x3f; break; case 1: seg_data=~0x06; break; case 2: se...
Read more